Skip to product information
1 of 4

eShield Power Cords

eShield Power Cords

Shielded power cords for monitors, laptops and office gear

Regular price $29.00 USD
Regular price Sale price $29.00 USD
Sale Sold out
Shipping calculated at checkout.
Type
Quantity
View full details

Every unshielded power cord on your desk or nightstand is a line of electric field running within arm's reach.

eShield power cords replace them with a shielded cord in a powder white finish, so the field drains to ground instead of radiating from the cord, and the cords blend into an office or bedroom.

Four versions cover the common inlets. A C13 in 18 gauge suits computer monitors and office equipment, and a C13 in 16 gauge suits higher-amperage devices with motors. A C5 in 18 gauge covers the three-lobed inlet some adapters use, and a black C7 in 20 gauge suits laptop chargers, game consoles and audio equipment.

Match the end to your device's power inlet and swap the cord.

Shielded cord that replaces an unshielded power cord

Powder white finish

C13 18 AWG: for computer monitors and office equipment

C13 16 AWG: for higher-amperage devices with motors

C5 18 AWG: for the three-lobed inlet some adapters use

C7 20 AWG in black: for laptop chargers, game consoles and audio equipment

C13 fits desktop computers, printers, copiers, A/V equipment and large TVs

C7 fits projectors, external hard drives, streaming boxes and set-top boxes

Four versions in one listing

Pairs with the eShield surge protector and extension cords

Look at your device's power inlet and choose the matching end: C13, C5 or C7. For a C13 inlet, use 18 gauge for monitors and office equipment and 16 gauge for devices with motors. Unplug the device, remove the old cord and plug the eShield cord into the inlet. Plug the wall end into a properly grounded outlet. The shield drains to ground, so it depends on one. A plug-in outlet tester from any hardware store will confirm the outlet is wired correctly. Built with a standard grounded three-prong US plug and rated for 240V/10A. Outside the US and Canada, they work on 230-240V outlets with a plug adapter that keeps the ground pin connected. Amperage ratings depend on wire gauge, so check your country's standards for voltage, amperage and wire gauge before use.

About The Shielding Shop

The Shielding Shop was founded by Brian Hoyer, an EMF consultant who also runs Shielded Healing, his EMF assessment and consulting business. It makes the eShield and SafeCharge lines of shielded power cords, power strips, grounded chargers and outlets, along with the Jovial shielded desk lamp.

Brian has owned ElectraHealth since 2025, and products from The Shielding Shop ship from ElectraHealth in the USA.

This product from The Shielding Shop is shipped by ElectraHealth from the USA

The Shielding Shop Policies

Returns

Products from The Shielding Shop may be returned within 30 days of receipt in new, resalable condition, with all packaging, parts, accessories and manuals. A restocking fee of up to 20% may apply (usually waived for exchanges). Return shipping is paid by the customer, and original shipping charges are not refundable.

If your order arrives damaged or incorrect, contact us and we will send a prepaid return label and replace the item at no charge.

Outlets and power docks that have been installed or wired in, and cords that have been cut or modified, cannot be returned.

Electrical compatibility

Voltage and plug compatibility varies by product. Check the How to Use tab for each product before ordering for use outside the US and Canada.

Description

Every unshielded power cord on your desk or nightstand is a line of electric field running within arm's reach.

eShield power cords replace them with a shielded cord in a powder white finish, so the field drains to ground instead of radiating from the cord, and the cords blend into an office or bedroom.

Four versions cover the common inlets. A C13 in 18 gauge suits computer monitors and office equipment, and a C13 in 16 gauge suits higher-amperage devices with motors. A C5 in 18 gauge covers the three-lobed inlet some adapters use, and a black C7 in 20 gauge suits laptop chargers, game consoles and audio equipment.

Match the end to your device's power inlet and swap the cord.

Features

Shielded cord that replaces an unshielded power cord

Powder white finish

C13 18 AWG: for computer monitors and office equipment

C13 16 AWG: for higher-amperage devices with motors

C5 18 AWG: for the three-lobed inlet some adapters use

C7 20 AWG in black: for laptop chargers, game consoles and audio equipment

C13 fits desktop computers, printers, copiers, A/V equipment and large TVs

C7 fits projectors, external hard drives, streaming boxes and set-top boxes

Four versions in one listing

Pairs with the eShield surge protector and extension cords

How to Use

Look at your device's power inlet and choose the matching end: C13, C5 or C7. For a C13 inlet, use 18 gauge for monitors and office equipment and 16 gauge for devices with motors. Unplug the device, remove the old cord and plug the eShield cord into the inlet. Plug the wall end into a properly grounded outlet. The shield drains to ground, so it depends on one. A plug-in outlet tester from any hardware store will confirm the outlet is wired correctly. Built with a standard grounded three-prong US plug and rated for 240V/10A. Outside the US and Canada, they work on 230-240V outlets with a plug adapter that keeps the ground pin connected. Amperage ratings depend on wire gauge, so check your country's standards for voltage, amperage and wire gauge before use.

About The Shielding Shop

About The Shielding Shop

The Shielding Shop was founded by Brian Hoyer, an EMF consultant who also runs Shielded Healing, his EMF assessment and consulting business. It makes the eShield and SafeCharge lines of shielded power cords, power strips, grounded chargers and outlets, along with the Jovial shielded desk lamp.

Brian has owned ElectraHealth since 2025, and products from The Shielding Shop ship from ElectraHealth in the USA.

Shipping & Returns

This product from The Shielding Shop is shipped by ElectraHealth from the USA

The Shielding Shop Policies

Returns

Products from The Shielding Shop may be returned within 30 days of receipt in new, resalable condition, with all packaging, parts, accessories and manuals. A restocking fee of up to 20% may apply (usually waived for exchanges). Return shipping is paid by the customer, and original shipping charges are not refundable.

If your order arrives damaged or incorrect, contact us and we will send a prepaid return label and replace the item at no charge.

Outlets and power docks that have been installed or wired in, and cords that have been cut or modified, cannot be returned.

Electrical compatibility

Voltage and plug compatibility varies by product. Check the How to Use tab for each product before ordering for use outside the US and Canada.


Unshielded power cords run electric fields right across your desk. eShield power cords replace them with a shielded cord in powder white, matched to the inlet on your device.

Choose C13 in 18 gauge for monitors and office equipment, C13 in 16 gauge for devices with motors, C5 in 18 gauge, or a black C7 in 20 gauge for laptop chargers and consoles.

Frequently Asked Questions

Which end do I need, C13, C5 or C7?
Look at the inlet on your device. C13 is the standard computer and monitor style, C5 is the three-lobed inlet found on some laptop adapters, and C7 is the two-slot figure-eight inlet on many chargers and consoles.
Should I choose 16 gauge or 18 gauge for a C13 cord?
Use 18 gauge for computer monitors and miscellaneous office equipment. Use 16 gauge for higher-amperage devices that run motors.
What does a shielded power cord do?
The shield around the conductors drains the cord's electric field to ground, so the cord does not radiate it into the room the way an unshielded cord does.
Does it work in an outlet without a ground?
No. The shielding drains through the ground pin of the plug, so an ungrounded outlet gives it nowhere to send the field. A plug-in outlet tester from any hardware store shows whether an outlet is wired correctly.
Who makes it?
The Shielding Shop, founded by Brian Hoyer, an EMF consultant who also founded Shielded Healing and has owned ElectraHealth since 2025.